Vacuum belt filter in the operation must be more attention, otherwise, affect the normal work, reduce efficiency, the following talk about the operation of the belt filter should pay attention to matters.
1,must pay attention to corrective roller deflection direction is correct and close to the switch sensor signal and the two-way five-valve corresponding relationship, otherwise, not only can not play the role of correction will make the filter cloth more deviation.
2, automatic correction device is to ensure that the normal operation of the important parts of the filter; so the equipment must be checked before the operation of automatic correction device function is normal, not normal circumstances can not boot, troubleshooting before starting.
3, automatic correction device working pressure should not be too high to be able to promote the correction roller, too high pressure will make the correction roller roll too fast and too much noise.
4, for the filter belt toward a fixed side of the phenomenon of deviation, can not be fixed to correct the angle of deflection roller to correct, otherwise, will make the proximity switch, solenoid valve coil for a long time the impact of life, affecting the normal correction function.
5, must ensure that the correction roller chute clean, often clean the slide foreign body, add a small amount of lubrication.
1,must pay attention to corrective roller deflection direction is correct and close to the switch sensor signal and the two-way five-valve corresponding relationship, otherwise, not only can not play the role of correction will make the filter cloth more deviation.
2, automatic correction device is to ensure that the normal operation of the important parts of the filter; so the equipment must be checked before the operation of automatic correction device function is normal, not normal circumstances can not boot, troubleshooting before starting.
3, automatic correction device working pressure should not be too high to be able to promote the correction roller, too high pressure will make the correction roller roll too fast and too much noise.
4, for the filter belt toward a fixed side of the phenomenon of deviation, can not be fixed to correct the angle of deflection roller to correct, otherwise, will make the proximity switch, solenoid valve coil for a long time the impact of life, affecting the normal correction function.
5, must ensure that the correction roller chute clean, often clean the slide foreign body, add a small amount of lubrication.
|
Address: No. 55-1, Zhichu Road, Zhifu District, Yantai City,
Shandong, China
|
|
Tel: 0086-535-6511737 Fax: 0086-535-6513072 Mobile :
0086-18615022312
|
|
Email: sales1@zmmachinery.com Skype
id: sdwin66 / WeChat:
dingding3249
|
|
Webite: www.zmmachinery.com, http://sdzhengmao.en.alibaba.com/
|
评论
发表评论