Vacuum belt filter before starting the operation should first check the equipment condition, to determine the normal, the following order to start the various parts of the motor:
1. Start the belt motor → start the stirring motor, then turn on the governor power switch, adjust the motor speed to the appropriate speed by rotating the speed control knob → start the spindle motor, adjust the motor to the appropriate speed → start the lubrication motor.
2. After the vacuum belt filter is operating normally, the slurry is fed into the tank until overflow occurs.
3. Then turn on the vacuum and anti-blowing pipe, began to filter work.
1. Start the belt motor → start the stirring motor, then turn on the governor power switch, adjust the motor speed to the appropriate speed by rotating the speed control knob → start the spindle motor, adjust the motor to the appropriate speed → start the lubrication motor.
2. After the vacuum belt filter is operating normally, the slurry is fed into the tank until overflow occurs.
3. Then turn on the vacuum and anti-blowing pipe, began to filter work.
Address: No. 55-1, Zhichu Road, Zhifu District, Yantai City, Shandong, China
Tel: 0086-535-6511737 Fax: 0086-535-6513072 Mobile : 0086-18615022312
Email: sales1@zmmachinery.com Skype id: sdwin66 / WeChat: dingding3249
Webite: www.zmmachinery.com,
评论
发表评论